1. Designing Molds: Molds are usually made of steel or aluminum. The mold of the plastic pallet should be designed according to the size, weight and usage scenarios of the plastic pallet to be produced.

2.Choose a plastic material: The choice of plastic depends on factors such as the intended use of the pallet, strength requirements, and any specific properties required (such as heat or chemical resistance). Common plastic materials used for pallets include PE and HDPE.

3.Melt the plastic pellets: Mix the plastic pellets as needed and add any additives or colorants required, then melt the plastic pellets in an extruder or special heating device.

4.Injection molding: Molten plastic material is injected into a mold cavity under high pressure. The mold is clamped to ensure precise molding of the plastic. Plastic fills the mold cavity, taking on the shape of the pallet. The plastic cools and solidifies inside the mold.

5. Open the mold and take out the tray: After the plastic cools and solidifies, open the mold and eject the plastic tray from the mold cavity. Ejector pins or ejector plates are used to push the pallet out of the mold. The pallet is then trimmed or cut to remove excess plastic or raw edges.

Plastic pallet making machines have a wide range of applications. Not only can we produce plastic pallets, we can also produce various plastic products, such as plastic pallets, plastic plates, plastic turnover boxes, plastic trash cans, etc. , plastic shelves, plastic manhole covers, etc. Details can be viewed on our official website https://www.casiting.com/